1、目的：了解圆柱齿轮的公差标准目的：了解圆柱齿轮的公差标准Aim:To understand tolerance standards of Cylindrical gear 初步掌握：初步掌握：Grasp preliminarily:1.1.应用要求、加工误差应用要求、加工误差 Application requirements and manufacturing error 2.2.评定指标评定指标 Evaluation index 3.3.图样标注图样标注 Labels of pattern 4.4.齿轮精度设计齿轮精度设计 Design of gear accuracy操作技能：评定指标的检
2、验操作技能：评定指标的检验 Manipulative skill:The test of evaluation index.特点特点 Traits 1 1 结构紧凑结构紧凑 Compact structure2 2 恒定的传动比恒定的传动比 Constant transmission ratio3 3 传动效率高传动效率高 High transmission efficiency 4 4 可实现平行轴、相交轴和交错轴之间可实现平行轴、相交轴和交错轴之间的传动的传动 It could realize the transmission between parallel axles,intersec
3、tant axles and interlaced axles 5 5 使用寿命长使用寿命长 Long working life6 6 维护保养简单维护保养简单 Sample to maintain作用：传递空间任意两轴（平行、相交、交错）的旋转运动，或将转动转换为移动。Founction:To transmit the revolving movements of any two axles(parallel,intersectant and interlaced)in space.And to convert turn to shift.缺点：要求较高的制造和安装精度，加工成本高、不适宜远
4、距离传动。缺点：要求较高的制造和安装精度，加工成本高、不适宜远距离传动。Disadvantages:It needs higher accuracies of manufacture and installment.Conversion cost is high and it is not suitable for long distance transmission.传动齿轮传动齿轮：转速较高，功率较大：转速较高，功率较大（汽车（汽车 飞机等变速装飞机等变速装置）置）Drive gear:Higher rotation rate and power(Speed variators in au
5、tomobiles and airplanes)动力齿轮动力齿轮：转速不高，传递扭矩（矿山机械：转速不高，传递扭矩（矿山机械 起重机械）起重机械）Power gear:The speed of revolution is not high and it transmits torque(mining machine and hoisting machinery)分度齿轮分度齿轮：精确回转（精密机床：精确回转（精密机床 仪表中的分度装置）仪表中的分度装置）Dividing gear:Precise rotation(precision machine tool and dividing devi
6、ce in instrumentation)齿轮传动机构组成 The form of gear transimission mechanism齿轮副、轴、轴承、箱齿轮副、轴、轴承、箱体体pair of gears,axles,bearings and boxes失效形式失效形式 failure mode 轮齿折断轮齿折断 tooth breakage1.由于多次重复的弯曲应力和应力集中造成的疲劳折断；The fatigue fracture which is caused by oft-repeated bending stresses and stress concentration.2.由
7、于突然严重过载或冲击载荷作用引起的过载折断。The overload break which is caused by sudden severe overload or impact load.直齿轮：齿宽较小的往往发生全齿折断,齿宽较大的直齿轮或斜齿轮则容易发生局部折断。Straight gear:The gears with smaller breadth of tooth often emerge whole tooth fracture while the straight gears or helical gears with bigger breadth of tooth are
8、 easy to emerge local break.一、一、轮齿的失效形式轮齿的失效形式失效形式失效形式齿面点蚀 Tooth surface pitting原因原因：由于在齿面啮合处脉动循环变接触应力长期作用下，当应力峰值超过材料的接触疲劳极限，经过一定应力循环次数后，先在节线附近的齿廓表面产生细微的疲劳裂纹。随着裂纹的扩展，将导致小块金属剥落，产生齿面点蚀。Reason:Because of the long term effect of pulsating cyclic variable contact stress on meshing point of tooth surface.
9、When peak stress exceeds materials contact fatigue limit,hairlike fatigue cracks will appear on tooth profile surface around nodel line after certain number of times of stress cycle.With the extending of flaws.Scrap metal will peel off to produce tooth surface pitting.点蚀不良影响点蚀不良影响：影响轮齿正常啮合，引起冲击和噪声，造
10、成传动的不平稳。Harmful effects of pitting:Influencing the normal engagement of gear teeth,causing concussions and noise,creating un-stationary transmission.一、一、轮齿的失效形式轮齿的失效形式失效形式失效形式齿面胶合齿面胶合Tooth surface bonding 高速重载传动中，常因啮合区温度升高而引起润滑失效，致使齿面金属直接接触而相互粘连。当齿面相对滑动时，较软的齿面沿滑动方向被撕下而形成沟纹。On high speed and heavy lo
11、ad transmission.The raise of meshing zones temperature usually causes lubrication losing efficacy to lead to the direct contacts of tooth surface metal and adhesions of each other.When tooth surfaces slither relatively,softer tooth surfaces are torn-out on glide direction to form grooves.传动精度传动精度tra
12、nsmission accuracy 齿侧间隙齿侧间隙-齿轮副合理性齿轮副合理性backlash in circular tooth-The rationality of gear pairs.Application requirements and processing errors 传递运动的准确性传递运动的准确性 The accuracy of transfer motion传递运动的平稳性传递运动的平稳性 The stability of transfer motion载荷分布的均匀性载荷分布的均匀性 The homogeneity of load distribution 要求从动轮
13、与主动轮运动协调，应限制齿轮一转内传动比的不均匀性。Requiring the coordination of driven wheel and action wheels movement.We are supposed to restrict the uneven movements of gears in one round.要求:齿轮在转过一个齿距角的范围内，其最大转角误差应限制在一定的范围内。Requirement:The maximum angular error should be restricted in a certain range within the range of
14、 that gear turning around one angular pitch.一个齿距角内瞬时传动比冲击、振动和噪声Instantaneous transmission ratio within one angular pitchconcussion,shake and noise.轮齿啮合过程中，工作齿面沿全齿高和全齿长上保持均匀接触，并且接触面积尽可能的大。In the engagement process of gear teeth.Working flanks of teeth are kept in even contact on whole teeth height an
15、d whole teeth length and contact areas should be as bigger as possible.引起应力集中，造成局部磨损，轮齿折断，影响引起应力集中，造成局部磨损，轮齿折断，影响齿轮的使用寿命齿轮的使用寿命Causing stress concentration to lead to concentrated wear and tooth breakage so that influencing working lifes of gears.齿轮传动过程中，非接触面之间一定要有合理的间隙。There must be reasonable clea
16、rance between non-contact surface in the process of gear transmission.1.贮存润滑油 store up lubricating oil2.补偿齿轮的变形 compensate the distortions of gears 3.制造和安装误差所引起的尺寸变动 size changes which are caused by Manufacturing and installation errors 传动齿轮Drive gear传递运动的准确性The accuracy of transfer motion传动的平稳性The
17、stability of transfer motion载荷分布的均匀性The homogeneity of load distribution 动力齿轮Power gear载荷分布的均匀性The homogeneity of load distribution 齿轮副侧隙的合理性Rationalities of backlashes of gear pairs 分度齿轮Dividing gear传递运动的准确性The accuracy of transfer motion齿轮副侧隙为零The backlashes of gear pairs are zero加工方法：加工方法：rocessi
18、ng methods:按齿廓形成原理按齿廓形成原理 仿形法仿形法 According to tooth profiles forming principlesform cutting method 展成法展成法 generating method滚刀hobbing cutter进给feed 0 0范成运动 generating motion齿轮滚刀Gear cutter hob被加工齿轮Machined gear工艺系统：机床、夹具工艺系统：机床、夹具、刀具刀具、齿坯本身齿坯本身Process system:machine tool,fixture,cutter and gear blanks
19、 themselves.安装、调整安装、调整 Install and adjust齿坯 Gear blankej o o o o齿圈 Gear ring孔的同心圆Concentric circle of holeo oejGeometric eccentricity 1分度蜗轮dividing worm wheel 2 蜗杆worm 3 滚刀hobbing cutter 4 齿坯gear blanks 34e ej je ed do o 机床工作台回转轴线机床工作台回转轴线o o工件孔轴线工件孔轴线o o 分度蜗轮几何轴线分度蜗轮几何轴线o o o o”12e ek kewo”oGears w
20、ith eccentric motions 原因：分度蜗杆的安装偏心和轴向蹿动,导致蜗轮（齿坯）转速不均匀 Reasons:The installation eccentricities and axial drifting of indexing worms contribute to inhomogeneous speeds of worm gears(gear blanks).结果：加工出的齿轮有齿距偏差和齿形偏差 Results:Processed gears have pitch deviations and profile deviations.34e ej je ed do o
21、机床工作台回转轴线机床工作台回转轴线o o工件孔轴线工件孔轴线o o 分度蜗轮几何轴线分度蜗轮几何轴线o o o o”12e ek kewo”o滚刀偏心 Eccentricity of hobbing cutter 按表现特征可分为4类：It could be divided into four classes acording to performance characteristic 齿廓误差齿廓误差 齿距误差齿距误差Tooth profile error Pitch error齿向误差齿向误差 齿厚偏差齿厚偏差Tooth alignment error Tooth thickness d
22、eviation齿廓相对于工件的旋转中心分布不均匀 Tooth profile is irregularly distributed to rotating center of the workpiece.齿廓不是理论的渐开线 Tooth profile is not theoretical involute.齿面沿齿轮轴线方向的形状和位置误差 Tooth flanks form and position errors along gear axis.齿厚相对于理论值在整个齿圈上不一致 Tooth thicknesss inconformity to theoretical value on
23、whole gear ring.径向误差 切向误差 轴向误差Radial errors Tangential errors Axial errors齿高方向 齿厚方向 齿向方向Tooth height direction Tooth thickness direction Direction of tooth Long cycle errorShort cycle error传递运动的准确性The accuracy of transfer motion 工作平稳性Work stability以齿轮一转一转为周期 Regard gears one turn as cycle以齿轮一齿一齿为周期
24、Regardgears one tooth as cycle第第公差公差组组No.1 No.1 Tolerance group传递运动的准确性传递运动的准确性 The accuracies of transfer motions 第第公差公差组组 No.2 No.2 Tolerance group传动的平稳性传动的平稳性 The stabilities of transmissions 第第公差公差组组No.3 No.3 Tolerance group载荷分布的均匀性载荷分布的均匀性 The homogeneities of load distributions GB/T10095.1-200
25、1GB/T10095.2-20011.传递运动准确性的评定指标 The evaluation indexes of transfer motion accuracy 2.传递运动平稳性的评定指标 The evaluation indexes of transfer motion stability 3.载荷分布均匀性的评定指标 The evaluation indexes of load distribution homogeneity4.影响侧隙的单个齿轮因素 Single gear factor which influences sideshake7.3 7.3 单个齿轮的评定指标单个齿轮
26、的评定指标 The evaluation criteria of single gear 切向综合总偏差（切向综合总偏差（F i）Tangential general deviation 齿距累积总偏差（齿距累积总偏差（Fp）Cumulative pitch error 径向跳动（径向跳动（F Fr r）Radial runout 径向综合总偏差（径向综合总偏差（Fi）Radical general deviation 公法线长度变动（公法线长度变动（F Fw w）The changes of base tangent length 齿轮一转范围内，测头在齿槽内与齿高中部双面接触，齿轮一转范围
27、内，测头在齿槽内与齿高中部双面接触，测头相对于齿轮轴线的最大变动量称齿圈径向跳动。测头相对于齿轮轴线的最大变动量称齿圈径向跳动。Within gears one turn range,gauge head is contacted in double sides with tooth height middle part within tooth space.The maximum variation that gauge contains toward gear axis is called gear ring radical runout.一齿切向综合偏差 f i Tooth tangen
28、tial and general deviation 一齿径向综合偏差 f i Tooth radical and general deviation 齿廓偏差 Tooth profile deviation 基圆齿距偏差基圆齿距偏差 f fpb pb Base circle pitch deviation 单个齿距偏差 fpt Single pitch deviation 螺旋线偏差：螺旋线偏差：在端面基圆切线方向上测得的实际螺旋线偏离设计螺旋线的量 Helix deviation:The tested amount that actual helix deviates from desig
29、ned helix on the tangential direction of end face base circle.（1 1）螺旋线总偏差螺旋线总偏差F F 在计值范围内，包容实际螺旋线迹线的两条设计螺旋线迹线间的距离Helix total deviation F F Within the range of values,the distances between two designed helix path lines which include helix path lines.（2 2）螺旋线形状偏差螺旋线形状偏差 f ff f 在计值范围内，包容实际螺旋线迹线的两条与平均螺旋
30、线迹线完全相同曲线间的距离 Helix shape deviation ff Within the range of values,the distances between two curves which are same as average helix path lines and including actual helix path lines.（3 3）螺旋线倾斜偏差螺旋线倾斜偏差f fhh 在计值范围的两端与平均螺旋迹线相交的设计螺旋线迹线间的距离 Helix incline deviation f fhh Within the range of values,the dist
31、ances between designed helix path lines that both ends are intersectant with average helix path lines.1 1 齿厚偏差齿厚偏差f fSnSnTooth thickness deviationThe upper deviation of tooth thickness Lower deviation一般都为负值一般都为负值Commonly to be negative value2 公法线长度偏差 Base tangent length deviation1 轴线的平行度误差 The paral
32、lelism errors of axes2 中心距偏差 The deviations of centre-to-centre separations 3 接触斑点 Contact spot4 齿轮副的侧隙 The sideshake of gear pair 齿轮副的最小极限侧隙应根据齿轮工作时的温度和润滑条件确定，与齿轮的精度等级无关。The minimum limit sideshake of gear pair should be ascertained by gears working temperature and lubrication condition.It has noth
33、ing to do with the gears accuracy class.高温工作的传动齿轮，为保证正常润滑，避免发热卡死，要求有较大的侧隙；There should be biggish sideshake for drive gear working in high terperature.That is to ensure normal lubrication and preventing the gear from fever and jammed 而需正反转或读数机构的齿轮，为避免空程，则要求较小的侧隙。There should be lesser sideshake for
34、the gears to prevent idle stroke which need positive inversion or reading mechanism.1.基齿厚制:即固定齿厚的极限偏差，通过改变中心距的基本偏差来获得不同的最小极限侧隙，此方法用于中心距可调的机构。Base gear thickness:Fix gear thicknesss limit deviations.Obtaining different minimum limit side gaps through changing the basic deviations of centre-to-centre
35、separations.This method is used for the mechanisms of which centre-to-centre separations are tunable.2.基中心距制:即固定中心距的极限偏差，通过改变齿厚的上下偏差来得到不同的最小极限侧隙，国标采用后一种.Base centre-to-centre separation distance system:Fix centre-to-centre separations limit deviation.Obtaining different minimum limit side gaps throu
36、gh changing the upper and lower deviations of gear thickness.Chinese Standard adopts the latter.=+工作温度工作温度 润滑方式润滑方式 圆周速度圆周速度Working temperature Lubrication method Peripheral speed 补偿温升引起的变形Compensate the distortions caused by temperature rise 保证齿轮工作面的正常润滑 Ensure the normal lubrication on gears worki
37、ng surface润滑方式lubricating method 圆周速度 V m/s peripheral speedV1010V2525V60V60喷油润滑Oil injection lubrication0.01mn0.02mn0.03mn0.030.05mn油池润滑Oil sump lubrication0.0050.01mn 注：mn为法向模数mm mn is normal modulus 齿轮精度等级的确定齿轮精度等级的确定 The ascertainment of gears accuracy class 齿轮副侧隙、齿厚极限偏差的确定齿轮副侧隙、齿厚极限偏差的确定 The as
38、certainment of backlash of gear pair and limit deviation of tooth thickness 齿坯精度和齿轮表面粗糙度齿坯精度和齿轮表面粗糙度 Precision of gear blanks and roughness of gear surfaces 图样标注图样标注 Pattern annotationPattern annotation GB/T 10095.1-2001 渐开线圆柱齿轮精度第渐开线圆柱齿轮精度第1部分部分 轮齿同轮齿同侧齿面偏差的定义和允许值侧齿面偏差的定义和允许值The accuracy of involut
39、e cylindrical gear Part1 The definitions and allowable values of tooth flank tooth surface deviations GB/T 10095.2-2001 渐开线圆柱齿轮渐开线圆柱齿轮 精度第精度第2部分部分 径向综径向综合偏差与径向跳动的定义和允许值合偏差与径向跳动的定义和允许值The accuracy of involute cylindrical gear Part2 The definitions and allowable values of radial integrated deviations
40、and radial runout GB/Z 18620.14 指导性技术文件指导性技术文件 Technical guidance document分度圆直径：510000mm standard pitch diameter 法向模数：0.570mmnormal modulus齿宽：41000mm tooth width标准适用范围 The scope of applications for standards 1313个精度等级个精度等级 Thirteen accuracy classes 0 0、1 1、2 2 3 3 5 5 6 6 8 8 9 9 1212待用待用inactive高精度
41、等级高精度等级High accuracy classes 中等精度等级 Middle accuracy classes 最低精最低精度等级度等级The lowest accuracy classes 7 7 GB/T10095.2GB/T10095.2（1 1）20012001一、渐开线圆柱齿轮精度等级一、渐开线圆柱齿轮精度等级 The accuracy classes for involute cylindrical gears 根据用途、使用要求、传递功率、圆周速度及其它技术要求而定，同时考虑切齿工艺及经济性。According to applications,operating requ
42、irements,transmitted power,peripheral speed and other technical requirements thus thinking about cutting process and economy.选择选择原则原则 Selection principles 1 1）计算法）计算法 computation technique 依据齿轮传动用途的主要要求，计算确定出其中一种使用要求的精度等级，再按其他方面要求，作适当协调，来确定其它使用要求的精度等级.According to the main requirements of gear drive
43、 applications,calculating and ascertaining one usage requirements accuracy class.Then according to other requirements of other aspects and making proper coordination to ascertain the accuracy classes of other usage requirements.当对传递运动准确性没有特别要求时，第公差组的精度常比第公差组低一个等级。When there are no special requiremen
44、ts for the accuracy of transfer motion.The precision accuracy of No.1 Tolerance group is usually lower by one class to No.2 Tolerance group 当所传递的功率不特别大时，第公差组一般采用和第公差组相同的精度等级。When the transmission power is not very high.No.3 Tolerance group usually adopts the same accuracy classes as No.2 Tolerance g
45、roup.齿轮副中两齿轮对应公差组的精度采用同级，也允许不同级。The corresponding tolerance groups that are of two gears in gear pairs also adopt different classes.齿轮圆周线速度第公差组的精度等级Gears circumferential line velocity The accuracy classes of No.2 Tolerance group No.1 Tolerance groupNo.2 Tolerance groupNo.3 Tolerance groupThe accurac
46、ies of transfer motions The stabilities of transmissions The homogeneities of load distributions 2 2）类比法）类比法 The methods of analogue 依据以往产品设计、性能试验以及使用过程中所积累的经验、可靠的技术资料，经过与所设计的齿轮在用途、工作条件及技术性能上作对比后，选定其精度等级。According to the accumulated experiences and reliable technical data from past products design,p
47、erformance test and use procedure.Choosing the accuracy classes after comparing with the designed gears on applications,working conditions and technical functions.应用范围应用范围精度等级精度等级应用范围应用范围精度等级精度等级测量齿轮测量齿轮3 35 5拖拉机拖拉机6 61010汽轮减速器汽轮减速器3 36 6一般用途的一般用途的减速器减速器6 69 9精密切削机床精密切削机床3 37 7轧钢设备的轧钢设备的小齿轮小齿轮6 6101
48、0一般金属切削一般金属切削机床机床5 58 8矿用绞车矿用绞车8 81010轻型汽车轻型汽车5 58 8起重机械起重机械7 71010重型汽车重型汽车6 69 9农业机械农业机械8 81111航空发动机航空发动机4 48 8精度标注精度标注Precision annotation精度等级精度等级accuracy class 侧隙代号侧隙代号齿厚极限偏差齿厚极限偏差Side gap code and limit deviation of tooth thickness 标准代号标准代号Standard code2.齿轮精度等级标注 The label for gears accuracy cla
49、ss -0.330-0.330-0.495-0.495（）GB/T10095.22001GB/T10095.22001例：7 7-6-6-6-6 G MG M GB/T10095.22001 GB/T10095.220017 F L GB/T10095.22001表示齿轮第、公差组的精度分别为7级、6级、6级。The precision accuracy of the tolerance groups,and for gears are respectively as class7,6 and 6.齿厚上、下偏差代号分别为齿厚上、下偏差代号分别为、。、。Gears upper and lowe
50、r deviation codes are respectively as and.齿厚极限偏差的数值=齿距极限偏差（fpt）的倍数The numerical value of limit deviation of tooth thickness=The multiple of transverse pitch limit deviation 国标规定国标规定:14种齿厚极种齿厚极限偏差的数值，大写的限偏差的数值，大写的英文字母表示。英文字母表示。National standard:14 kinds of numerical values for limit deviation of toot
