1、VLT AutomationDrive 1Danfoss Drives A/S2参数表参数表Danfoss Drives A/S3Back to contentDanfoss Drives A/S4Back to contentDanfoss Drives A/S5Back to contentDanfoss Drives A/S6强电端子强电端子 电机端子 电源端子 制动及负载共享 继电器 LC滤波器 外部24V供电Back to contentDanfoss Drives A/S7ControlteminalsBack to contentDanfoss Drives A/S8Tensio
2、n spring technology 接线 拆线 连接Back to contentDanfoss Drives A/S9Control Terminal DiagramBack to contentDanfoss Drives A/S10Back to contentDanfoss Drives A/S11开关开关 S201, S202, and S801开关 S201 (A53) 、 S202 (A54) 用来选择53/54端子的电流 (0-20 mA) 或电压输入(-10 to 10V) 开关 S801 (BUS TER.) 是 RS-485 口的终端电阻开关 (terminals 6
3、8 and 69).默认值:S201 (A53) = OFF (电压 input)S202 (A54) = OFF (电压 input)S801 (终端电阻) = OFFBack to contentDanfoss Drives A/S12亮Status暗Status 显示亮度显示亮度14-22工作模式工作模式14-50射频干扰滤波器射频干扰滤波器15-43软件版本软件版本恢复出厂值恢复出厂值按住同时上电，保持5秒(or P.14-22)OkMainMenuStatusOr press for 3s MainMenuQuickMenu快捷快捷(direct access)MainMenuMai
4、nMenu-Key1 x pushing - last changed Parameter2 x pushing - MainmenuImportant settings:Back to contentDanfoss Drives A/S130-01 Language1 EnglishUser-Menu0-01 Language1 EnglishCommissioning-MQ4 Last 10Q5 All ChangesList of changesSpeed RPMCurrent AOutput kWFrequency HzProtokolleProtocolsOkBackQ1User-M
5、enuQ2Commissioning-MenuQ3List of changed parameter Q4 Last 10 changes Q5 All changesQ6Protocols0-01 Language1 EnglishLast 10 Changes0-01 Language1 EnglishAll ChangesOkBackQ1 User-MenuQ2 CommissioningQ3 List of changesQ6 ProtocolsQuickmenuBack to contentDanfoss Drives A/S14MainMenuMaingroup-choiseGro
6、up 2-Group 2-* * *Group 16-Group 16-* * *Group 1-Group 1-* * *Group 0-Group 0-* * * 0-*Operation/Display1-*Motor/Load2-*Brake function3-*Reference/Ramps4-*Limits/Warnings5-*Digitale In-/Outputs6-*Analoge In-/Outputs7-*Closed Loop8-*Options/Interfaces13-*Smart Logic14-*Special Functions15-*Triplog/Ma
7、intenance16-*Data readoutsUndergroup-choise2-02-0* *2-22-2* * 16-016-0* *16-816-8* * 1-01-0* *1-81-8* *0-00-0* *0-60-6* * OkBack 0-040-04 0-010-010-660-66 0-600-601-011-01 1-001-001-811-81 1-801-802-032-03 2-002-002-232-23 2-202-2016-0616-06 16-0016-0016-8616-86 16-8016-80Parameter-choiseOkBackBack
8、to contentDanfoss Drives A/S150-*Operation/Disp1-*Motor/Load2-*Brakefunctio3-*Ref./RampsMaimenuMainMenu1-00 Configura0 Open LoopDefaultsettings1-20Motordata4 kwMotordataOkBack1-0*Defaultset1-2*Motordata1-3*Motordata(1-4*TemperaturLoad/Motor2-0*DC-Hold / DC .2-1*Overvoltage2-2*Mech. BrakeBrakefunctio
9、nen16-0*Readout-All16-1*Readout-M16-3*Readout F16-5*Readout-SDate readouts0-o*Defaultsett0-1*Parameterset0-2*LCP-Display0-3*LCP KeysDisplay/OperationOkBackMainMenuBack to contentDanfoss Drives A/S16ParameterArray NumberFunction3-100 Preset Ref. 11 Preset Ref. 22 Preset Ref. 33 Preset Ref. 44 Preset
10、Ref. 55 Preset Ref. 66 Preset Ref. 77 Preset Ref. 8Array NumberArray Value0 RPM 0.00 A 1(1)0 RPM 0.00 A 1(1)ReferencesReferences3-10 3-10 PresetPreset Ref. Ref.000,00%0,00% ReferencesReferences 3-1*OkOk0 RPM 0.00 A 1(1)0 RPM 0.00 A 1(1)ReferencesReferences3-10 3-10 PresetPreset Ref. Ref.000,00%0,00%
11、 ReferencesReferences 3-1*BackBackCancelorOkor0 RPM 0.00 A 1(1)0 RPM 0.00 A 1(1)ReferencesReferences3-10 3-10 PresetPreset Ref. Ref.000,00%0,00% ReferencesReferences 3-1*Array InputBack to contentDanfoss Drives A/S170-01 LanguageValue:English(ENGLISH) 0German(DEUTSCH)1French(FRANCAIS)2Danish(DANSK)
12、3Spanish(ESPANOL) 4Italian(ITALIANO) 5Swedish(SWEDISH) 6Dutch(DUTCH) 7Chinese(CHINESE) 10Finnish(FINNISH) 20English US(ENGLISH US) 22Greek(GREEK) 27Portuguese(PORTUGUESE) 28Slovenian(SLOVENIAN) 36Korean(KOREAN) 39Japanese(JAPANESE) 40Turkish(TURKISH) 41Traditional Chinese 42Bulgarian 43Serbian 44Rom
13、anian(ROMANIAN) 45Hungarian(HUNGARIAN) 46Czech 47Polish(POLISH) 48Russian 49Thai 50Bahasa Indonesian(BAHASA INDONESIAN) 510-0* Operation / DisplayParameters related to the fundamental functions of the frequency converter, function of the LCPbuttons and configuration of the LCP display.0-0* Basic Set
14、tingsParameter group for basic frequency converter settings.Back to contentDanfoss Drives A/S180-02 Motor Speed UnitValue: RPM 0 Hz 1Select display of motor speed parameters (i.e. references, feedbacks and limits) in terms of shaft speed (RPM) or output frequency to the motor (Hz). Back to content0-
15、03 Regional SettingsValue: International 0 US 1Select International 0 to set par.1-20 Motor Power units to kW and the default value of par. 1-23 Motor Frequency to 50 Hz. Select US 1 to set par.1-21 Motor Power units to HP and the default value of par. 1-23 Motor Frequency to 60 Hz.Danfoss Drives A/
16、S190-10 Active Set-upValue:0-1* Set-up OperationsDefine and control the individual parameter setups. Factory setup 0* Set-up 1 1 Set-up 2 2 Set-up 3 3 Set-up 4 4 Multi set-up 9Select the set-up to control the frequency converter functions.Factory Set-up 0 cannot be changed. It contains the Danfoss d
17、ata set, and can be used as a data source when returning the other set-ups to a known state.Set-up 1 1 to Set-up 4 4 are the four separate parameter set-ups within which all parameters can be programmed.Select Active Set-up 9 for remote selection of set-ups using digital inputs and the serial commun
18、ication port. This set-up uses the settings from par. 0-12 This option linked to. Stop the frequency converter before making changes to open loop and closed loop functions. Use par. 0-51 Set-up copy to copy a set-up to one or all other set-ups. Back to contentDanfoss Drives A/S200-11 Edit Set-upValu
19、e:Select the set-up to be edited (i.e. programmed) during operation; either the active set-up or one of the inactive set-ups. Factory set-up 0 cannot be edited but it is useful as a data source to return the other set-ups to a known state. Set-up 1 1 to Set-up 4 4 can be edited freely during operati
20、on, independently of the active set-up. The Active set-up 9 can also be edited during operation. Edit the chosen set-up from a range of sources: LCP, FC RS485, FC USB or up to five fieldbus sites. Factory setup 0* Set-up 1 1 Set-up 2 2 Set-up 3 3 Set-up 4 4 Active set-up 9Back to contentDanfoss Driv
21、es A/S210-12 This Set-up Linked toValue:To enable conflict-free changes from one set-up to another during operation, link set-ups containing parameters which are not changeable during operation.The link will ensure synchronising of the not changeable during operation parameter values when moving fro
22、m one set-up to another during operation. Not changeable during operation parameters can be identified by the label FALSE in the parameter lists in the section Parameter Lists. The par. 0-12 link set-up feature is used by Multiset-up in par. 0-10 Active Set-up. Multi set-up is used to move from one
23、set-up to another during operation (i.e. while the motor is running). Not linked 0 Set-up 1 1 Set-up 2 2 Set-up 3 3 Set-up 4 4Back to contentDanfoss Drives A/S220-12 This Set-up Linked toValue:Use Multi set-up to shift from Set-up 1 to Set-up2 whilst the motor is running. Programme in Setup1 first,
24、then ensure that Set-up 1 and Set-up 2 are synchronised (or .linked.). Synchronisation can be performed in two ways:1. Change the edit set-up to Set-up 2 2 in par.0-11 Edit Set-up and set par. 0-12 This Set-up Linked to to Set-up 1 1. This will start the linking (synchronising) process.OR2. While st
25、ill in Set-up 1, copy Set-up 1 to Set-up2. Then set par. 0-12 to Set-up 2 2. This will start the linking process.After the link is complete, par. 0-13 Readout: Linked Set-ups will read 1,2 to indicate that all not changeable during operation parameters on are now the same in Set-up 1 and Set-up 2. I
26、f there are changes to a .not changeable during operation. parameter, e.g. par 1-30 Stator Resistance (rs), in Set-up 2, they will also be changed automatically in Set-up 1. A switch between Setup 1 and Set-up 2 during operation is now possible.Back to contentDanfoss Drives A/S230-13 Readout: Linked
27、 Set-upsValue:Array 50-255 0View a list of all the set-ups linked by means of par. 0-12 This Set-up Linked to. The parameter has one index for each parameter set-up. Each set-up shows the set-up bitset to which it is linked.Back to contentDanfoss Drives A/S240-2* LCP DisplayDefine the display in the
28、 Graphical Logic Control Panel.None 0Profibus Warning Word 953Readout Transmit Error Counter 1005Readout Receive Error Counter 1006Readout Bus Off Counter 1007Warning Parameter 1013Running Hours 1501kWh Counter 1502Control Word 1600Reference Unit 1601Reference % 1602Status Word 1603Main Actual Value
29、 % 1605Custom Readout 1609Power kW 1610Power hp 1611Motor Voltage 1612Frequency 1613Motor Current 1614Frequency % 1615Torque 1616 Speed RPM 1617Motor Thermal 1618KTY Sensor Temperature 1619Motor Angle 1620Phase Angle 1621 Torque % 1622DC Link Voltage 1630BrakeEnergy/s 1632BrakeEnergy/2 min 1633Heats
30、ink Temp. 1634Inverter Thermal 1635Inv. Nom. Current 1636Inv. Max. Current 1637SL Control State 1638Control Card Temp. 1639External Reference 1650Pulse Reference 1651Feedback Unit 1652Digi Pot Reference 1653Digital Input 1660Terminal 53 Switch Setting 1661Analog Input 53 1662Terminal 54 Switch Setti
31、ng 1663Analog Input 54 1664Analog Output 42 mA 1665Digital Output bin 1666Freq. Input #29 Hz 1667Freq. Input #33 Hz 1668Back to contentDanfoss Drives A/S250-2* LCP DisplayDefine the display in the Graphical Logic Control Panel.Freq. Input #33 Hz 1668Pulse Output #27 Hz 1669Pulse Output #29 Hz 1670Re
32、lay Output bin 1671Counter A 1672Counter B 1673Prec. Stop Counter 1674Fieldbus CTW 1 1680Fieldbus REF 1 1682Comm. Option STW 1684FC Port CTW 1 1685FC Port REF 1 1686Alarm Word 1690Alarm Word 2 1691Warning Word 1692Warning Word 2 1693Ext. Status Word 1694Ext. Status Word 2 1695PCD 1 Write to MCO 3401
33、PCD 2 Write to MCO 3402PCD 3 Write to MCO 3403PCD 4 Write to MCO 3404PCD 5 Write to MCO 3405PCD 6 Write to MCO 3406PCD 7 Write to MCO 3407PCD 8 Write to MCO 3408PCD 9 Write to MCO 3409PCD 10 Write to MCO 3410PCD 1 Read from MCO 3421PCD 2 Read from MCO 3422PCD 3 Read from MCO 3423PCD 4 Read from MCO
34、3424PCD 5 Read from MCO 3425PCD 6 Read from MCO 3426PCD 7 Read from MCO 3427PCD 8 Read from MCO 3428PCD 9 Read from MCO 3429PCD 10 Read from MCO 3430Digital Inputs 3440Digital Outputs 3441Actual Position 3450Commanded Position 3451Actual Master Position 3452Slave Index Position 3453Master Index Posi
35、tion 3454Curve Position 3455Track Error 3456Synchronizing Error 3457Back to contentDanfoss Drives A/S260-2* LCP DisplayDefine the display in the Graphical Logic Control Panel.Actual Velocity 3458Actual Master Velocity 3459Synchronizing Status 3460Axis Status 3461Program Status 3462Idle Time 9913Para
36、mdb Requests in Queue 9914Analog input X30/11 1675Analog input X30/12 1676Analog output X30/8 mA 16770-20 Display Line 1.1 SmallValue: Speed RPM16170-21 Display Line 1.2 SmallValue: Motor Current A16140-22 Display Line 1.3 SmallValue: Power KW1610Back to contentDanfoss Drives A/S270-23 Display Line
37、2 LargeValue: Frequency Hz16130-24 Display Line 3 LargeValue: Reference %16020-25 个人菜单个人菜单Value:Array 200-9999最多可以定义50个显示在Q1个人菜单中的参数。该菜单可通过LCP上Quick Menu键访问。如果设为0000则会删除该参数。Back to contentDanfoss Drives A/S280-40 Hand on Key on LCPValue: Disabled0Enabled 1 Password 2Select Disabled 0 to avoid accide
38、ntal start of the frequency converter in Hand mode. Select Password 2 to avoid unauthorised start in Hand mode. If par. 0-40 is included in the Quick Menu, then define the password in par. 0-65 Quick Menu Password.0-4* LCP KeypadEnable and disable individual keys on the LCP keypad.0-41 off Key on LC
39、PValue: Disabled0Enabled 1 Password 2Select Disabled 0 to avoid accidental stop of the frequency converter. Select Password 2 to avoid unauthorised stop. If par. 0-41 is included in the Quick Menu, then define the password in par. 0-65 Quick Menu Password.Back to contentDanfoss Drives A/S290-42 Auto
40、 on Key on LCPValue: Disabled0Enabled 1 Password 2Select Disabled 0 to avoid accidental start of the frequency converter in Auto mode. Select Password 2 to avoid unauthorised start in Auto mode. If par. 0-40 is included in the Quick Menu, then define the password in par. 0-65 Quick Menu Password.0-4
41、3 Reset Key on LCPValue: Disabled0Enabled 1 Password 2Press Reset and select Disabled 0 to avoid accidental alarm reset. Press Reset and select Password 2 to avoid unauthorised resetting. If par. 0-43 is included in the Quick Menu, then define the password in par. 0-65 Quick Menu Password.Back to co
42、ntentDanfoss Drives A/S300-50 LCP CopyValue:0-5* Copy / SaveCopy parameter settings between set-ups and to/from the LCP. No copy 0 All to LCP 1 All from LCP 2 Size indep. from LCP 3 File from MCO to LCP4 File from LCP to MCO5Select All to LCP 1 to copy all parameters in all set-ups from the frequenc
43、y converter memory to the LCP memory. Select All from LCP all 2 to copy all parameters in all set-ups from the LCP memory to the frequency converter memory.Select Size indep. from LCP 3 to copy only the parameters that are independent of the motor size. The latter selection can be used to programme
44、several drives with the same function without disturbing motor data. This parameter cannot be adjusted while the motor is running.Back to contentDanfoss Drives A/S310-51 set-up CopyValue: No copy 0 Copy to set-up1 1 Copy to set-up2 2 Copy to set-up3 3 Copy to set-up44 Copy to all5Select Copy to set-
45、up 1 1 to copy all parameters in the present edit set-up (defined in par. 0-11 Edit Set-up) to Set-up 1. Likewise, select the option corresponding to the other set-up(s). Select Copy to all 9 to copy the parameters in the present set-up over to each of the set-ups 1 to 4.Back to contentDanfoss Drive
46、s A/S321-00 Configuration ModeValue:1-0* General SettingsDefine whether the frequency converter operates in speed mode or torque mode; and whether the internal PID control should be active or not. Speed open loop 0 Speed closed loop 1 Torque 2 Process 3Select the application control principle to be
47、used when a Remote Reference (via analog input) is active. A Remote Reference can only be active when par. 3-13 Reference Site is set to 0 or 1. Speed open loop 0: Enables speed control (without feedback signal from motor) with automatic slip compensation for almost constant speed at varying loads.
48、Compensations are active but can be disabled in the Load/Motor par. group 1-0*. Speed closed loop 1: Enables encoder feedback from motor. Obtain full holding torque at 0 RPM. For increased speed accuracy, provide a feedback signal and set the speed PID control. Torque 2: Connects the encoder speed f
49、eedback signal to the encoder input. Only possible with .Flux with motor feedback. option, par. 1-01 Motor control principle. Process 3: Enables the use of process control in the frequency converter. The process control parameters are set in par. groups 7-2* and 7-3*Back to contentDanfoss Drives A/S
50、33Back to contentSpeed control open loopParameters related- 0-02 Motor Speed Unit (Hz/RPM)- 1-01 Motor Control Principle- 1-03 Torque Characteristics- 3-00 Reference Range- 3-02 Minimum Reference- 3-03 Maximum Reference- 3-04 Reference Function- 4-10 Motor Speed Direction- 4-11 Motor Speed Low Limit
