1、GST Nov 2005PC200-8PC200-8Page 2/65PC200-8GST Nov 2005ContentsPage1.Outline of Screens and Switches 3,42.Function Switches53.Start-up Screen and End Screen64.Reading Service Meter after Powering Off 75.Work Mode Selection 8,96.Travel Speed Selection107.Auto-decelerator Selection,Wiper Switch/Washer
2、Switch 11,128.Air-Conditioner Display Screen 139.ECO Display/Energy-Saving Guidance Display 1410.Camera Screen 15,1611.Service Meter/Clock Selection 1712.Maintenance Screen1813.User Menu Screen19(1)Breaker/Attachment Setting 20-22(2)Screen Adjustment23(3)Clock Adjustment 24(4)Language Setting 25(5)E
3、conomy Mode Adjustment2614.Cautions 28Page15.Service Menu Screen 28(1)Monitoring29(2)Failure History30,31(3)Maintenance History32(4)Maintenance Mode Change33(5)Telephone Number Setting34(6)Initial Setting 35-43(7)Adjustment44-47(8)Operation in Reduced Cylinder Mode 48,49(9)No-injection Cranking 50(1
4、0)Fuel Consumption Display 5116.Password Setting52,5317.Password Entry Screen at Power-ON5418.Attachment/Maintenance Password Setting5519.List of Cautions and Icons5620.Monitoring Code Table57-6121.List of User Codes 6222.Error Code Table63 65Page 3/65PC200-8GST Nov 2005Outline of Screens and Switch
5、es(1)Large typeliquid crystal displayWork mode and wiper SWFunction SWAir-conditioner SWPage 4/65PC200-8GST Nov 2005Outline of Screens and Switches(2)Page 5/65PC200-8GST Nov 2005Function Switches8-type multi-monitor adopts 6 functional switches.Page 6/65PC200-8GST Nov 2005Start-up Screen and End Scr
6、eenPower-ONPower-OFFKomatsu logo screen(for 2 sec)Start-up inspection screen(2 sec)Work mode and travel display(2 sec)Normal screenScreen display remains 5 sec.Page 7/65PC200-8GST Nov 2005Service Meter Reading with Key-OFFKeep Buzzer cancel SW and Auto-decelerator SW pressedPage 8/65PC200-8GST Nov 2
7、005Work Mode Selection(1)If no operation is made for 5 sec and over,press F5(return)to return to the normal screenPress Work Mode Select SW selects a work mode from P E L B P1)2)Press to confirm the selected modeDisplays 2 secDisplays 2 secEach pressing of Work mode can be selected also by using ()a
8、nd ()Page 9/65PC200-8GST Nov 2005Work Mode Selection(2)If no operation is made for 5 sec and over,press F5(return)to return to the normal screenPress Work Mode Select SWPress to select B1)2)Press ()to select BPress ()to confirm the selected modeIf breaker mode is selected,the screen to the left alwa
9、ys appears.Page 10/65PC200-8GST Nov 2005Travel Speed SelectionEach pressing of Travel Speed Select SW selects a speed from Lo Mi HiDisplays 2 secDisplays 2 secPage 11/65PC200-8GST Nov 2005Auto-Decelerator SelectionWhen auto-decel is selected,an icon appears to the upper left-hand corner of the scree
10、n.Pressing Auto-Decel Select Switch selects auto-deceleration.Page 12/65PC200-8GST Nov 2005Wiper Switch/Washer SwitchEach pressing of Wiper Switch selects INT ON OFF.Washer operates while Washer Switch is pressed.An icon appears to the upper left-hand corner of the screen while the wiper is in opera
11、tion.The figure below indicates INT wiping operationPage 13/65PC200-8GST Nov 2005Air-Conditioner Display ScreenIf no operation is made for 5 sec and over,press F5(return)or F6(decide)to return to the normal screen:Automatic air-conditioning switch:Automatic air-conditioning switch:Air-conditioner sw
12、itch:OFF switch:Air flow rate setting(for 6-stage adjustment):Inside/outside air selection:Temperature setting:Air blow selectionLCDAir blow modeAir outlet portRemarksFront blow outFront and rear blow outFront and rear below blow outDefroster blow outBlow out downwardSelection disabled during automa
13、tic operationSelection disabled during automatic operationSelection disabled during automatic operationBlow out downwardDefroster blow outPage 14/65PC200-8GST Nov 2005ECO Display/Energy-Saving Guidance DisplayECO display This display indicates the work load state.If the indicator changes to orange,i
14、t does not mean machine failureEnergy-saving guidance display If the lever remains in neutral position successively for 5 minutes and over without error/caution indication,the display changes to this screen,prompting operator to stop engine.A lever operation or pressing F5 restores the original scre
15、en.Page 15/65PC200-8GST Nov 2005Camera ScreenPress F3 switch()Camera mark appears to F3 key only if camera setting is presentPress F5 switch()Camera 1 and 2 screens appear:Screen display for the first camera set up:Screen display for the second camera set up:Screen display for the 3rd camera set up:
16、Camera 1 and 2 screens appearPage 16/65PC200-8GST Nov 2005Camera Screen(Warning,Error Generation and Other Operations)Error generation timeIf an error is generated and the lever is at neutral position for 10 sec and over,the display returns to normal screenIf error&caution are generatedIf air-condit
17、ion operation,travel speed selection or work mode change is made on the camera screen,the display shifts to respective screen.After the operation is completed,the display returns to the standard screen.After the operation is completed,the display returns to the standard screen.After the operation is
18、 completed,the display returns to the camera screen.Page 17/65PC200-8GST Nov 2005Service Meter/Clock Selection When displaying clock When displaying service meter Each pressing of F4 function switch selects the clock and service meter display alternately Page 18/65PC200-8GST Nov 2005Maintenance Scre
19、enMaintenance item Engine oil replacement Engine oil filter replacement Fuel main filter replacement Fuel pre-filter replacement Hydraulic oil filter replacement Hydraulic oil tank breather replacement Damper case oil check and replenishment Final case oil replacement Hydraulic oil replacementPressi
20、ng F5()function switch selects this screenMaintenance time reset screenSelect an item and press F6 switchTo reset press F6()Pressing F5 or F6 switch or making no operation for 30 sec restores the normal screenPage 19/65PC200-8GST Nov 2005User Menu ScreenPressing F6()function switch selects this scre
21、enSelect and press F6 switch to shift to a selected screen.User menu item Breaker/Attachment setting(displayed only when attachment setting is made)Message display(displayed only when KOMTRAX is present)Screen adjustment Clock adjustment Language setting Economy mode adjustmentPress F5 switch to ret
22、urn to normal screenPage 20/65PC200-8GST Nov 2005Breaker/Attachment SettingSelect the breaker/attachment setting item and press F6 switchWork mode select screenB,ATT appear on the work mode select screen on the machine installed with the breaker and attachmentPage 21/65PC200-8GST Nov 2005Breaker Mod
23、e Flow Rate Setting ChangeSelect breaker and press F6 switchWork mode select screenDefault setting is as follows:Breaker 180 l/minBreaker 100 l/minBreaker settingBreaker flow rate setting changeSelect the breaker flow rate item with F3 and confirm with F6Breaker flow rate setting screenSelect the br
24、eaker with F3 and F4 and confirm with F6Select the flow rate with F3 and F4 and confirm with F6Press F5 to return to the preceding screenPage 22/65PC200-8GST Nov 2005Attachment Flow Rate Setting ChangeSelect attachment and press F6 switchDefault setting is as follows:Attachment 430 l/minAttachment 4
25、30 l/minAttachment flow rate setting changeSelect the attachment flow rate item with F3 and confirm with F6Select the attachment with F3 and F4 and confirm with F6Select the flow rate with F3 and F4 and confirm with F6Attachment flow rate setting screen(A)(B)Attachment settingPage 23/65PC200-8GST No
26、v 2005Screen AdjustmentDaytime screen adjustmentNighttime screen adjustmentSelect the screen adjust item and press F6 switchLight switchFor nightFor daytimeF2:Resets all adjusted values to the default valuesF3:Shifts the indicator to the leftF4:Shifts the indicator to the rightF5:Returns to the user
27、 menu screenF6:Confirms the change and shifts on to the following itemShifts to luminance adjustment Contrast adjustment Brightness adjustment and back to luminance adjustmentPage 24/65PC200-8GST Nov 2005Clock AdjustmentSelect the clock adjust item and press F6 switchF3:Advances time by one(1)hour(F
28、or minute adjustment,this advances time by one(1)minute)F4:Sets the time back by one(1)hour(For minute adjustment,this sets the time back by one(1)minute):F3:Shifts to the item on the left:F4:Shifts to the item on the right:F5:Cancels the change and returns to the user menu screen:F6:Confirms the ch
29、angePage 25/65PC200-8GST Nov 2005Language SettingTen(10)languages indicated in the diagram below can be set upF3:Moves down to an item directly belowF4:Moves up to an item directly aboveF5:Cancels the change and returns to the user menu screenF6:Confirms the change and shifts on to the user menu scr
30、eenSelect the language setting item and press F6 switchPage 26/65PC200-8GST Nov 2005Economy Mode AdjustmentEco-mode(E)is available for the fuel-economy-minded customersSelect the economy mode adjust item and press F6 switchF3:Moves down to an item directly belowF4:Moves up to an item directly aboveF
31、5:Cancels the change and returns to the user menu screenF6:Confirms the change and shifts on to the user menu screenPage 27/65PC200-8GST Nov 2005Cautions項目交換交換燃料交換燃料交換作動油交換作動油交換点検補充交換交換作動油交換Hydraulic oil temperature dropAutomatic preheating indicationCharging voltage dropCoolant capacity dropWater i
32、n fuelHydraulic oil temperature riseOverheatEngine oil capacity dropFuel level lowSymbolDisplay itemConditions for generationDisplay method to operatorEngine water temperature overheating102C or higherSymbol indication and intermittent buzzer soundingEngine water temperature low30C or lowerSymbol in
33、dicationHydraulic oil temperature overheating102C or higherSymbol indication and intermittent buzzer soundingHydraulic oil temperature low20C or lowerSymbol indicationFuel lowFuel gauge 0 indication Symbol indicationRadiator coolant level abnormally lowWhen the sensor contact is OPENCharge voltage a
34、bnormally lowMonitor input during engine operation falls short of specified value(7.8V)Symbol indicationAir cleaner cloggingDuring engine operation and the sensor contact OPENSymbol indicationEngine oil pressure abnormally lowDuring engine operation and the engine oil pressure is 0.5k or underEngine
35、 oil capacity abnormally lowEngine stopping and the sensor contact OPENSymbol indicationWater in fuelSensor voltage outside specified rangeSymbol indicationMaintenance preliminary noticeRemaining time to the maintenance is less than 30 hours30 sec indication after start-upMaintenance warningRemainin
36、g time to the maintenance is less than 0 hoursSymbol indication and intermittent buzzer soundingSymbol indication and intermittent buzzer sounding30 sec indication after start-upPage 28/65PC200-8GST Nov 2005Service Menu ScreenPressing +1,2,3 selects screensService menu item01Monitoring02Failure hist
37、ory03Maintenance history04Maintenance mode change05Telephone number setting06Default setting07Adjustment08Arm crane setting09Operation on reduced cylinders10No-injection cranking11Fuel consumption display12KOMTRAX setting indication(only when KOMTRAX setting provided)13KOMTRAX message indication(onl
38、y when KOMTRAX setting provided)Select an item and press F6 switch to shift to a selected screen.Page 29/65PC200-8GST Nov 2005MonitoringSelect the monitoring item and press F6 switchSelect the item and press F6 switchUp to 6 items can be selected.Enter 99999 and press F6 to select the monitoring scr
39、een.(The monitoring screen appears also by pressing F6 a bit longer or by double-clicking F6)Select an item and press F6 switch to shift to a selected screen.Pressing Hold(F4)fixes the numeric value at the time of the pressing.Pressing the work mode select,travel select or auto-decel switch during m
40、onitoring shifts the display to this screen.Page 30/65PC200-8GST Nov 2005Failure HistoryFailure history of electrical systemFailure history of air-conditionerFailure history of mechanical systemSelect the item and press F6 switchPressing F2 switch erases the air-conditioner error.E indicates that th
41、e system remains in error condition.Deletion of failure history of the mechanical system is not available.Select the failure history item and press F6 switch Service Menu Screen Failure History Select Screen Page 31/65PC200-8GST Nov 2005Failure History ResetPressing +1,2,3 selects screenMemorize nec
42、essary failure histories before erasing.Press F2 switch(CLEAR)Press F6 to erase allSelect the item and press F6 switchPress F6 to erase selected itemScreen to erase all electrical abnormality record information Screen to erase individual electrical abnormality record information Page 32/65PC200-8GST
43、 Nov 2005Maintenance HistorySelect the maintenance item and press F6 switchPage 33/65PC200-8GST Nov 2005Maintenance Mode ChangeSelect the maintenance mode change item and press F6 switchSelect the item and press F6 switchMaintenance Mode Change00 Maintenance mode using/not using01 Engine oil replace
44、ment intervals02 Engine oil filter replacement intervals03 Fuel main filter replacement41 Fuel pre-filter replacement04 Hydraulic oil filter replacement intervals05 Hydraulic oil tank breather replacement intervals07 Damper case oil inspection and replenishment intervals98 Final case oil replacement
45、 intervals09 Machinery case oil replacement intervals10 Hydraulic oil replacement intervals99 Initialize all(not to be indicated on the menu)Maintenance Mode Change Screen Service Menu Screen 00:Maintenance Mode On/Off screen 99:Screen to clear all to the initial set values 01:Engine Oil Change Inte
46、rval screen 1Page 34/65PC200-8GST Nov 2005Telephone Number SettingSelect the telephone number setting item and press F6 switchMake entry using the number keys(0 to 9)and press F6 key to confirm or press CLEAR to erase the entered number.Telephone number will appear to the bottom if an error occursPr
47、essing F5 SW returns to the preceding screen.Service Menu ScreenPhone Number Entry screen Page 35/65PC200-8GST Nov 2005Default SettingDefault Setting01Work mode on power-ON02Unit selection03Attachment yes/no04Attachment/Maintenance password setting05Camera setting06ECO display setting07Breaker autom
48、atic judgment setting10Initialize all(not to be indicated on the menu)Select the default setting item and press F6 switchService Menu ScreenDefault ScreenPage 36/65PC200-8GST Nov 2005Work Mode Display on Power-ONSelect the work mode item on power-ON and press F6 switchWork mode and travel display(2
49、sec)Normal screenStart-up screenIf the breaker mode was selected,the screen to the left appears at start-up for each power-ON.Select a mode item and press F6 to change the screen from the start-up to a selected item.Pressing F6 after entering 10 from the number keys on the default setting screen wil
50、l set the default upon power-ON to the work mode the system was in when it was turned-OFF last time.Page 37/65PC200-8GST Nov 2005Unit SelectionSelect the unit selection item and press F6 switchPressing F6 after entering 10(all to default)using the number keys in the default setting screen sets to th
