1、How To Make a Robotelectric ironoscilloscope componentThe Complete Kit Includes:EZ-B v3 Bluetooth Robot ControllerEZ-Builder Robot Control Software&SDKVision Tracking CameraHC-SR04 Ultrasonic Distance Sensor6 x Servos(4 standard,2 Continuous)2 x Peripheral Cables6 x AA Battery Holder&AdapterServo At
2、tachments and WheelsSupports many Robot Platforms!Online Video TutorialsFree UpdatesToo many features to list!The only thing this toy had was a circuit board to make noises like Wall-e.Everything else was manual for movements,including the arms,the neck and the tracks.No other electronics.Took on Wa
3、ll-e quite some time ago,it started with an Arduino but once i found the EZ-B there was no looking back Step 1:The Brain-An awesome EZ-B Module Took out the voice module,then striped(剥掉剥掉)it down to just the two power wires,and then hooked it to the EZ-B for power,to one of the 5v outputs.Step 2:Voi
4、ce Module-ExtractionAfter taking the toy apart and extracting the voice module you will see that you will have room to put the EZ-B module there.Step 3:Step 3:Installing the EZ-B moduleStep 4:Vision Tracking CameraMake sure you write down which inputs are what,it makes it easier in the EZ-Builder to
5、 configure everything.Step 6:The SensorsI/R distance sensor on the front of Wall-es neck too for extra detection,you may want to program his head to swing(摇摆摇摆)back and forth to detect objects better when he is traveling around.All programmable within the EZ-Builder software!Wall-e is complete besides a few enhancements that will give him.Tanks you -Made ByDannyJeamous